In the process of using the paper tube machine, it is inevitable that there will be wear. How to ensure the normal operation of the paper tube machine and extend its service life are the topics that many businesses are concerned about.
1. Mechanical cleaning of paper tube. After unpacking, checking and disassembling the equipment, it is necessary to remove the rust inhibitor, internal residual iron chips, rust, dust accumulated in transportation and deposit, etc., and the equipment can only be started after cleaning.
2. The paper tube is mechanically smooth. Only after all parts of the equipment are clean can they be oiled smoothly. It is necessary to test the smooth oil to determine whether it can be used after it meets the requirements. It is necessary to filter the smooth oil before participating in the equipment, and the refueling shall reach the regular oil level position; all smooth oil and oil holes shall be filled with smooth oil. As long as the machine is set up and ready to work.
How to increase the service life of paper tube machine
How to increase the service life of paper tube machine? I think this is a very concerned issue for all users. Increase the service life and save the cost of production. Here I will give you some pertinent suggestions.
1. Before using the paper tube machine, the condition of each part should be checked in detail to see whether the switch of the electrical equipment is good, whether the electrical circuit is insulated, whether the screw cap screw is fastened, whether the protective device is safe and other parts. The next operation can be carried out only after all these parts are checked.
2. When cutting paper, if using ventilating machine tool to cut paper, the height of paper tube machine shall not exceed 125mm, and it shall be fixed with clamping iron according to the size requirements. The machine tool can only cut paper, not other plates. Two or more people should work together. When working, the paper tube machine is not allowed to reach under the pressing iron and blade to prevent cutting injury. If a special paper cutter is used, do not extend your hand into the rotating mandrel to prevent crushing;
3. Each equipment must be in the charge of a specially assigned person and cannot be misappropriated by others. It is strictly prohibited to place other sundries in each part of the machine tool during the work, and the staff shall not leave the work post without permission during the operation.
4. During edge grinding, the trouser legs shall not be involved in the paper loading floor shaft; when adjusting the machine tool, pay attention to the abrasive cloth wheel.
Jinan zengshan specializes in the development and production of paper tube machine equipment.
Hebei zengshan paper tube machine / Baota paper tube machine / good service of paper tube machine manufacturer / Hebei paper tube machine / fully automatic Baota paper tube machine / fireworks paper tube machine / fireworks paper tube machine / fully automatic cone paper tube machine / fireworks paper tube equipment / China paper tube machine / paper tube production equipment / spiral paper tube machine / cone paper tube machine / Xingtai paper tube machine accessories / paper tube machine / Shandong paper tube machine accessories / paper tube machine accessories / Hebei zengshan Intelligent Technology Limited company
Website: http://www.dyjzm.com